Reliable Technologies for the production of films, sheets and composites.

At Reifenhäuser Cast Sheet Coating we develope and manufacuture complete cast film lines, sheet lines and extrusion coating lines as well as individual components such as dies and winders. Since all of these units use similar technology, we can transfer our experience and innovations from one process to the other. The result of this transference: multiple good solutions for our customers.

Cast film lines

Cast films give packaging a high-quality appearance, keep foodstuffs fresh, have important functions in sanitary products or protect high-quality surfaces. We optimally adapt the technology to the individual production requirements – the modular line design makes this possible.

Cast film lines

Thermoforming Sheet Lines

Rely on precision, efficiency, and reliability in the production of your polished products. Three coextrusion feedblock systems; seven different die series and polishing machines with horizontal, vertical and diagonal directions of extrusion make it possible to find the optimal configuration for each application.

Thermoforming Sheet Lines

Extrusion coating lines

Create high-quality, adhesive-free composites by combining films with other materials such as paper, textiles, or nonwovens. The production of plastic films and the subsequent processing is carried out energy-efficiently in one single production run - requiring minimal space.

Extrusion coating lines

Extruder, polishing stacks, coextrusion systems, flat dies, Winders

We develop and manufacture all quality-critical components in-house – to ensure high line availability, consistent quality and high flexibility in the development of individual line concepts.


Rethinking precision
The new polish stack MIREX-MT

Imagine you could reproduce the best film quality again and again.

The new polishing stack MIREX-MT with mechatronic roll set-on system works as precisely as no other polishing stack. The new polishing stack MIREX-MT with mechatronic roll set-on system works as precisely as no other polishing stack. Would it not be perfect if polishing machines worked with the precision of today's tool-making machinery? We believe it would. With the innovative Mirex-MT polishing stack, you can adjust the polishing nip of your sheet extrusion line with a precision that is 10 times higher than before. It saves you at least 15 min. setup time and reduces the reject rate by up to 75 percent. The settings are configured fully automatically. This is how precision becomes reproducible.

REIcofeed 2.1
Adjust layer thicknesses while the system is running.

REIcofeed 2.1 makes line stops for changes to high-tech products superfluous: Calibrate nine or more layers with our profiling system while production is running - including the central layer. This minimizes waste of valuable raw material. Thanks to the low tolerances, it is possible to produce individual layers that are extremely thin and therefore as economical as possible.


MIDEX winder series
Reduce waste through efficient winding.

Product type, rigidity, thickness of the film and production speed: Many factors are decisive for choosing the right winder. Selecting the right system is the key to profiting from higher efficiency, precision and significantly lower waste production. Reduce the reject rate by up to 70 percent. We can advise you whether a cantilever winder, jumbo-reel winder, turret winder or rotary arm winder is the right choice for you.


Amazing Facts
Would you have guessed that?

10 times less
water than the lunar soil must polyethylene terephtalate (PET) contain to be extrudable.

100 μm
thin was the PET film produced by Reifenhäuser Cast Sheet Coating at the open house exhibition in the Technology Centre during K2013.

46 years
was the Reifenhäuser cast film line type ST 150 A reliably producing at a german customer until it was sold to Sweden recently.

Your contact


Desiree Aringhoff

Human Resources

+49 2241 23510-169 desiree.aringhoff@reife...


Tanja Kühn-Söndgen

Public Relations

+49 2241 23510-480 tanja.kuehn-soendgen@re...


Jörg Stolz

Director of purchasing

+49 2241 23510-687 joerg.stolz@reifenhause...

Research & Development

Dr. Paul Walach

Head of Technology

+49 2241 481-206 Paul.Walach@reifenhause...


Volker Pütz

Sales Coordinator

+49 2241 481-553 volker.puetz@reifenhaus...


Markus Schroeder

Service Director

+49 2241 481-167 markus.schroeder@reifen...

LCC Reifenhäuser

Pokrovsky Boulevard, 14/6-8
109028 Moscow

P +7 495 956 75 77
P +7 495 917 54 55
F +7 495 956 47 02

Reifenhauser Incorporated

12260 W 53rd Street North
Maize KS 67101

P +1 316 260-2122
F +1 316 260-8033

Reifenhauser Plastic Machinery (Suzhou) Co. Ltd.

BLD. 8, No.2 Ousheng Road, Pingwang Town, Wujiang District, Suzhou
Post Code: 215221

P +86 512 65686036
F +86 512 65686031

Reifenhauser S.r.l.

Via N. Machiavelli 1
20025 LEGNANO (Mi)

P +39 0331 579867

Reifenhäuser (India)
Marketing Ltd.

229, Udyog Bhavan
Sonawala Road, Goregaon (East)
Mumbai 400 063

P +91 22 2686 2711
F +91 22 2686 2722

Reifenhäuser GmbH & Co. KG

Manila Office
Lot 17, Block 56, Francisco Reyes St.
Garden Abelardo Homes, BF Homes
Paranaque City 1718

P +63 24033395

Reifenhäuser Latina SpA

Miguel Claro 195, Of. 207
Providencia Santiago,

P +56 2 25847292

Reifenhäuser Private Ltd.

Ho Chi Minh City Office
9th Fl., Maritime Bank Tower
180 - 192 Nguyen Cong Tru
Nguyen Thai Binh Ward Dist.1
Ho Chi Minh City

P +84 8 62879137
F +84 8 62884691

Reifenhäuser Private Ltd.

Asian Pacific Headquarter
25 International Business Park
#04-72 German Centre
Singapore 609916

P +65 65628740
F +65 65636136

Reiloy Metall GmbH

Istanbul Office
Atakent Mah – 243 Sok,
TEMA Istanbul
6/B Daire 31
34307 – kücükcekmece – Istanbul

Reiloy USA Corp.

12260 W 53rd Street North
Maize, KS67101

P +1 800 247 1144
P +1 316 721 1144
F +1 316 721 1495