In Germany, we develop and manufacture all core components on our own that are essential for the product quality. That gives us end-to-end control over the quality of our lines and enables us to develop customized line concepts for your individual product requirements.

Core competence since 1948

Single-screw extruders
For a broad spectrum of applications

Our single-screw extruders are made of a highly wear-resistant material provided by our sister company Reiloy. In addition, we offer multi-purpose extruders for processing of all standard polymers, and extruders optimized for a special material formulation.

Twin-screw extruders
Direct extrusion of PET and fillers

Our REItruder twin-screw extruders can process virgin PET, recycled PET, PET flakes, additives and fillers directly. The energy-intensive and costly pre-drying and compounding are omitted. Production on a REItruder takes place in a single operation, from the basic product to the end product, with no intermediate cooling and re-melting of the plastic material. Twin-screw extruders from our sister company Reifenhäuser Extrusion Technology are especially designed for integration in cast film and sheet extrusion lines.

REIcofeed coextrusion systems
Production of multi-layer products with optimal tolerances.

REIcofeed C
For unfrequent product changes

REIcofeed C is the most economic solution for companies who produce few or similar composite structures. Layer tolerances can easily be regulated by exchangeable pins.

REIcofeed 1.0
For frequent product changes

With REIcofeed 1.0 you can regulate the outer layers via adjustable slides during running production. That reduces the waste resulting from product changes to a minimum and increases the availability of the line.

REIcofeed 2.1
For composites of 9 layers and more

Control all layers including the core layer during running production, also when you are producing more than nine layers. The patented profiler technology makes it possible.

Flat dies
The right die for every application

Our portfolio
Dies with coathanger channel
Dies with T-channel and internal deckling
Multi-channel dies

Automatic thermo-bolt system
Dies with edge encapsulation
ISR-II gap adjusting system for thick film dies

The ISR-II system allows you to adjust the lip gap during running production. This function is especially useful for frequent product changes.

Polishing stacks
High-precision cooling and polishing of films and sheets.

The Reifenhäuser portfolio includes polishing stacks of horizontal, vertical and inclined extrusion direction. Polishing stacks of special design are also available for individual applications.

MIREX-MT - our new development
The most precise polishing stack available on the market.

Rethinking precision

Imagine you could produce best quality film fully automatically, again and again.

Our newest generation of polishing stacks is inspired by today’s machine tool technology. The patented mechatronic roll adjusting system enables fully automatic and reproducible settings during running production.

10 times higher precision of die gap adjustment

Downgauging through reduced thickness tolerances

75 percent less waste production

80 percent faster product change

Winding systems
Excellent reel quality for high-end cast film.

The modular design of our lines extends also to the Reifenhäuser winders: For a perfect match to product requirements. Rugged design, smooth running and precise control of web tensions are features that all of our winding machines have in common.

Rotary arm winder MIDEX-RA
Rotary arm winding with no
rewinding and pre-converting

Max. winding diameter: 800 mm / 1000 mm
Max. webs: 8
Working widths: 300 - 600 mm
Thickness range: 0,02 mm to 0.25 mm
Inside diameters of winding shafts: 3“, 6“, 8“

MIDEX-RA rotary arm winders are optimally suited for users who want to further process their products without previous rewinding and converting. The phase of uncontrolled winding tensions during reel change can be reduced to about 30 percent with the rotary arm technology. The result: 70 percent fewer rejects.

MIDEX-HS slide winder
Horizontal winding of large reel diameters and multi-web production

Max. winding diameter: 1200 mm
Max. webs: 3
Working widths: 800 - 1200 mm
Thickness range: 0.02 mm to 0.35 mm
Inside diameters of winding shafts: 3“, 6“

With our slide winders, a minor increase of the winding diameter has a great effect on the productivity. A change from 1,000 to 1,200 mm results in a 45 percent increase of running meters per reel. The advantage: Fewer reel changes, especially for conversion.

The MIDEX-HSS series provided with centre drive has been optimized for winding of stiff and thick films while MIDEX-HSD winders with two centre drives are ideally suited for thinner films.

Your contact


Desiree Aringhoff

Human Resources

+49 2241 23510-169


Tanja Kühn-Söndgen

Public Relations

+49 2241 23510-480 tanja.kuehn-soendgen@re...


Jörg Stolz

Director of purchasing

+49 2241 23510-0

Research & Development

Dr. Paul Walach

Head of Technology

+49 2241 481-206 Paul.Walach@reifenhause...


Volker Pütz

Sales Coordinator

+49 2241 481-553


Markus Schroeder

Service Director

+49 2241 481-167 markus.schroeder@reifen...

Reifenhauser Incorporated

12260 W 53rd Street North
Maize KS 67101

P +1 316 260-2122
F +1 316 260-8033

Reifenhauser Plastic Machinery (Suzhou) Co. Ltd.

BLD. 8, No.2 Ousheng Road, Pingwang Town, Wujiang District, Suzhou
Post Code: 215221

P +86 512 65686036
F +86 512 65686031

Reifenhauser S.r.l.

Via Trentacoste 9
20134 Milano

P +39 02 2150054

Reifenhäuser (India)
Marketing Ltd.

229, Udyog Bhavan
Sonawala Road, Goregaon (East)
Mumbai 400 063

P +91 22 2686 2711
F +91 22 2686 2722

Reifenhäuser GmbH & Co. KG

Moscow Office
Pokrovsky Boulevard, 14/6-8
109028 Moscow

P +7 495 956 75 77
P +7 495 917 54 55
F +7 495 956 47 02

Reifenhäuser GmbH & Co. KG

Manila Office
Lot 17, Block 56, Francisco Reyes St.
Garden Abelardo Homes, BF Homes
Paranaque City 1718

P +63 24033395

Reifenhäuser Latina SpA

Miguel Claro 195, Of. 207
Providencia Santiago,

P +56 2 25847292

Reifenhäuser Private Ltd.

Ho Chi Minh City Office
9th Fl., Maritime Bank Tower
180 - 192 Nguyen Cong Tru
Nguyen Thai Binh Ward Dist.1
Ho Chi Minh City

P +84 8 62879137
F +84 8 62884691

Reifenhäuser Private Ltd.

Asian Pacific Headquarter
25 International Business Park
#04-72 German Centre
Singapore 609916

P +65 65628740
F +65 65636136

Reiloy Metall GmbH

Istanbul Office
Atakent Mah – 243 Sok,
TEMA Istanbul
6/B Daire 31
34307 – kücükcekmece – Istanbul

Reiloy USA Corp.

12260 W 53rd Street North
Maize, KS67101

P +1 800 247 1144
P +1 316 721 1144
F +1 316 721 1495


Volker Pütz

Sales Coordinator

+49 2241 481-553